No alarm and event are updating in the list.
we have 800 Xa 5.1 DCS system. Our plant was in shutdown. We had 2 project running parallal
1) To install the smart client in each computer having 800xa base. For this purpose we had to install the correction restarted and all CS,HS and Domain server many time. During this some change happened. After that modification smart client is working properly.
2) We had to replace the PM864 with PM 891 processor. For this we took back up of our controller in which the activity had to be done.
Now the current situation is We are getting all the alarm and event related to the process like (over or under flow of signal, high or low process values ) but what we are not getting the Operatoional activities done by the operator (like when the valve was taken in manual, from which system mode was changed ).Means we are not getting operation related event or alarm.alarm count remains always zero in operator workplace and the aknowledge button is
please suggest what should i do.
Please take some screenshots of what you get and hopefully also what you got in the past but no longer since the installation of Smart Client and replacement of AC 800M controller.
There are several threads on AKS giving help on tracing alarm in AC 800M. Google for "AKS AC 800M Alarm Conditions". Does your alarm conds show state 0 (disabled or error)?
Does your OPC server panel connect the AC 800M controller on Alarm & Event (the second tab)?