800XA with AC800M ( DNP3 and GE-GSM ) Support
800XA Electrical Intergration :
Any one can give a solution or project executed .
With AC800M Controller with DNP3 Protocol ( We are replacing existing system no change in slave device allowed)
AC800M Controller with GE-GSM Protocol( We are replacing existing system no change in slave device allowed)
Converting to modbus is not allowed due to time stamp issue, used for SOE recording.
If you don´t need the GE GSM data in the AC800M controller you can use the GSM PGIM scanner as OPC Server in 800xA through PLCConnect.
The same with DNP3, for this purpose you could use Kepware DNP3 OPC Server.
In Spain we have used this solutions in some projects without problems.