Advant Controller 410/450 and MasterPiece 200/1 - Use of the PC element SENDREQ
Problem:Solution
A description of this resolution:
"Advant Controller 410/450 and MasterPiece 200/1 - Use of the PC element SENDREQ" resolves the following:
A description of this resolution:
- Use the input terminal PRVBLK instead of the terminal BLOCK to block the sending
If sending orders received by SENDREQ during blocking, shall be effected then use the input terminal PRVBLK instead of the terminal BLOCK to block the sending.
[ref SR2058 VASMASOITA0145 ]
"Advant Controller 410/450 and MasterPiece 200/1 - Use of the PC element SENDREQ" resolves the following:
- Sending of Data Sets can be stopped temporarily in two ways
The PC element SENDREQ is normally used in RCOM applications. If sending of Data Sets shall be stopped temporarily it is possible to do that in two different ways.
1. Set the input terminal BLOCK to value TRUE. All sending of Data Sets on the communication link is stopped until the terminal BLOCK is set to FALSE. If sending orders are given at the ACT terminal during blocking, they are ignored.
2. Set the input terminal PRVBLK to value TRUE. Sending of Data Sets on the communication link is stopped until terminal PRVBLK is set to FALSE. If sending orders are given at the terminal ACT during blocking, the data packages corresponding to the last given order will be sent.
Products concerned
All versions and revisions of
Advant Controller 410
Advant Controller 450
All revisions of
MasterPiece 200/1 *3.0 and *4.0
Software concerned
All versions and revisions of
QC01-BAS11
QC02-BAS21
All revisions of
QMP220 SW *5.0 and *6.0
QMP240 SW *5.0 and *6.0
QMP260 SW *5.0 and *6.0
QMP280 SW *5.0 and *6.0
QAC280 SW *5.0, *5.1, *6.0 and *6.1
- Article imported from the previous version of KnowledgeBank
Answers
0
Cause: Article was imported from the previous version of KnowledgeBank Resolution:
Add new comment