Advant Controller 450 - Erronous description of PIDCONA Process Dialog parameters in the User’s Guide
A description of this resolution:
- These errors will be corrected in the next revision of the User’s Guide.
[ref SR1094 VASMASOITA0158 ]
"Advant Controller 450 - Erronous description of PIDCONA Process Dialog parameters in the User’s Guide" resolves the following:
- Documentation error
The description of Dynamic keys, Parameters in Appendix B, Process Dialog is erroneous. The correct dialog with descriptions is shown below.
D3 Gain 1.32
D4 TI 6.01
D5 TD 4.01
D8 BETA 0.34
D9 TS 2
D10 DZ 0.98
Dialog for changing gain
Dialog for changing the time constant for integration
Dialog for changing the time constant for derivation
Dialog for changing the setpoint factor in the proportional part
Dialog for changing the sampling period
Dialog for changing deadzone
The errors in the User’s Guide are the name of the parameter of key D9 (TF instead of TS), and its description, and the parameter BETA description.