On-line monitor for PCV02 in V8.0
A description of this resolution:
- Changeover mode via key SERVICE
1. Call channel image via system dialog of station.
2. Select key "SERVICE" (thus a mode changeover will be effected).
3. Subsequently the card in on-line monitor can be addressed.
"On-line monitor for PCV02 in V8.0" resolves the following:
- System handling
After "switch on power supply" or after having been replugged PCV02 with standard mode (PV80FC) can be in so-called mode 7.
In this mode the card cannot be addressed by the diagnosis of the on-line monitor (I_S).
Message "Partner Program Error: 7C65" appears.
The error only occurs when on-line monitor commands of the PCV02 in V8.0 (I_S; CC_PCV) are carried out immediately after "switch on power supply" or replugging the card (e. g. during update preparation). It preferably occurs with channels 6 and 8 as there the operating system does not perform any mode changeover.