Configuration archiving is not terminated
A description of this resolution:
- Deleting the function list element using the symbol name (SNAME)
Proceed as follows to delete FL elements using the Online Monitor:
1. SC1 G F S /SNAME/ : ;SNAME = Symbol name
2. SC1 P F D: ;Delete function list element (FLE)
3. Enter password
"Configuration archiving is not terminated" resolves the following:
- System handling
Configuration archiving is not terminated or takes too long.
The underlying cause is:
- Continuous loop in the supply list (SL) or function list (FL)
This behaviour is possible when a continuous loop occurs in the SL or the FL. This can be caused by an aborted dialog, a RAM error or a full SNAME or system image area.
Attempt to find the function in which the problem occurred. Otherwise, attempt to initialise the station and load intact data.
The archiving procedure is as follows:
Beginning with the address 5DFF the functions are archived via 1A7D to 19A3. From 19A3 on, archiving returns to 1A7D and archives to 19A3 again, then returns to 1A7D again.
The process repeats in cycles. 19A3 as the system marker COUNTER appears to be the cause of the error.