A description of this resolution:
- Enter new coupling references
Find out the coupling reference for the affected PAR02 with command SC1 LK.
If the reference (number of coupling element visible in 1st column) is smaller than or equal to 1FFH the described error will not be concerned.
If the reference is > 1FFH the following measures may be taken:
- Increase TEU and/or decrease TZO in order to increase the TEU/TZO quotient thus increasing the value to above that value calculated from the reference.
Example of calculation:
The reference number according to SC1 LK is 250H
TEU = 1s TZO = 20s
250H:2 = 128H
low-byte is deleted > 100H
100H = 6,4% (basic: 0FA0H = 100%)
TEU/TZO = 5%
Then TEU or TZO must be changed in such a way as to attain a quotient > 6,4%. If regarding the process this is not possible, the affected PAR02 will have to be provided with lower coupling references.
- Delete all references to PAR02 in the functions. If there is a blank space in the range of < 1FFH (blank = distance higher than 2), all references can be entered again. Thus a blank space in the lower reference numbers is automatically used. If there is no blank space different, lower reference numbers will have to be deleted. It is recommendable to perform a reference test subsequently. Then first of all the PAR02 references and then the other deleted references will have to be configured again.
The problem is solved in Software version V8.0H.Symptoms: