Logging of fault sequence logs
A description of this resolution:
- Confi handling
The SET modules (SETZB) preceding the repetition module (WIEB) define the number of definitions.
This Z count value must always exceed the number of tags in the tag group by 1.
In paticular, PSTAP01 must be reconfigured as follows:
PUHR,109,8 ASCB,0,2 SETZB,1,0 COMB,106,4
SETZB,0,21 SETZB,01,13 WIEB,USTAP03 ASCB,0,3
The error has been eliminated in all V8.0 versions.
When updating to versions V7.2H and V7.2G-CE the use of the WIEB module has to be checked and the handling mentioned above has to be carried out.
"Logging of fault sequence logs" resolves the following:
If the number of measuring point repetitions entered in the format is smaller than or equal to the corresponding tag entries (number of tags within the tag group) the log will not output any applicable values and terminated incorrectly.
The error only occurs:
- when outputting fault sequence logs, in versions V7.2H and V7.2G-CE Minden.
The underlying cause is:
- Tag group is not duly unlocked
When completing tag group processing by the repetition module (WIEB) the tag group is not duly unlocked. It remains blocked and cannot be addressed for the next log line.
The result will be faulty log termination.