AI830 Pt100 Input module. Influence between channels
Problem:Solution
- The problem is fixed in current PR: C of the module
[ref SR8055 VASMASOITA0017 ]
- AI830 PR: A, PR: B
In case there is an open circuit condition e.g. a sensor wire break on an active input readings of the next channels are affected by over charging the A/D converter by the open circuit detection arrangement. The magnitude of influence depends on the selected measurement range. The root cause is in the module’s firmware only.
- Article imported from the previous version of KnowledgeBank
Asked 11 years ago
Add new comment