S800 does not initialise at the Profibus DP
- Update to revision 1.3/1
Update the CI830 to revision 1.3/1 or set the master address to 0.[ref SR0069 VASMASOITA0002 ]
- General System Information
When the Profibus is initialised the Profibus coupling module CI830 will not start up if the master address is other than zero and if the configuration is bigger than the DEFAULT maximum configuration. In place of the valid address, the address is set at 0 with the result that data cannot be transferred between the master and the slave.
- CI830 with revisions 1.3/0 and lower
Error in revisions 1.3/0 and lower.