Time synchronisation from external system
- Take notice of following important hints:
By the installation of the AC800F-OPC-server, do choose the setting “Disable Time Synchronisation”. Otherwise deinstall and re-install the OPC-server software properly.
On the AC800F-OPC-server, if other AC800F programs are running, all these programs
The AC800F-OPC-server must have the same subnetmask as the AC800F controllers
Configure one dummy variable on the AC800F project with an access for the AC800F-OPC-server and load the OPC server in commissioning mode.
If all the channels of a DAI04 are not allocated and the free channels are between connected channels, slight precision errors can occur when the next connected channel is measured.