DCP02/DCP10 Support in older versions – CN 37-086 EN
- Update the system to a valid Freelance version
- Where a DCP10, HW index 40.14 or 50.03 and where a DCP02, HW index 50.03 and higher is used, proceed as follows:
Step 1: Update the system to a valid Freelance version as shown in the table above.
Step 2: Insert the new hardware.
For versions V3.2, V3.3 and V4.1 there is a limited number of components available with the old index which can be used as replacement components. Place orders for components in software versions V3.2, V3.3 and V4.1 with Parts Service.
Contact: Wolfgang Albrecht, Tel.: +49 69 7930 4710 or +49 1805 123 580
Components requiring repairs should be sent to our workshop as usual:
ABB Process Industries
Hoeseler Platz 2
For the purposes of modernisation in relation to the use of the latest hardware, current and supported software, we recommend a update to V6.2.
For updating versions V3.2, V3.3 and V4.1 to V6.2 the V6.2 software can be ordered at 30% of the list price of the New Order List.
Contacts in Service:
Tel.: +49 1805 123 580
Valid for software versions: V3.2, V3.3, V4.1,V5.1, V5.2, V6.1, V6.2
The components DCP02 and DCP10 have beenredesigned, which involves a change to the boards. These new components bear the hardwareindex 40.14 or higher than / equal to 50.03.
Software versions prior to V5.1 do not support this hardware.
The current Service Packs for each of the software versions V5.1, V5.2, V6.1 and V6.2guarantee their functionality.
There is an additional restriction on the use ofa DCP02 as the Gateway CPU:
The new hardware bearing the index higher than / equal to 50.03 is not supported bysoftware V3 to V5.
Instead a DCP10 bearing the hardware index higher than / equal to 50.03 must be used.
The DCP02 can only be used from versions V6.1SP4HF1and V6.2SP2 (taking the informationcontained in the table into account).
To make this easier to follow, here is acompatibility tableSoftware version
Service Pack available for DCP02/DCP10 as PS-CPU
Service Pack available for DCP02/DCP10 as Gateway CPU
Software update possible
Minimum required versionV3.2NoNoNoYesV5.1SP4 Hotfix1V3.3NoNoNoYesV5.1SP4 Hotfix1V4.1NoNoNoYesV5.1SP4 Hotfix1V5.1YesNoYesYesV5.1SP4 Hotfix1V5.2YesNoYesYesV5.2SP2 Hotfix1V6.1YesYesYesYesV6.1SP4 Hotfix1V6.2YesYes Yes YesV6.2SP1,recommended V6.2SP2
The last Service Packs and Hotfixes are availableunder: