Service Packs V32TOL_1 and V32VIS_1 for the version V3.2 - CN 37-060 EN
- Installation of the Service Packs
The installation of the Service Packs means a system standstill as the process andcontrol stations all have to be reloaded.
Ensure that all the process functions concerned are shut down. Carry out the installationaccording to the installation instructions included with the Service Packs.
If you have any problems installing the Service Packs, please contact our CustomerInteraction Center at:
Phone: +49 1805 123 580
Fax: +49 621 381 5135
- General System Information
There are new Service Packs for the version V3.2GR and V3.2US with following elements:
Service Pack V32TOL_1 for DigiTool and Service Pack V32VIS_1 for DigiVis.
These software programs correct aspects of the functionality of software alreadyinstalled:
Service Pack V32TOL_1:
1. Potential Process Station malfunction caused by Modbus link on the CPU module.
2. Forced values of I/Os migh be lost after a redundancy toggle.
3. Archive data loss due to a modification of trend display/ archive parameters.
4. User-defined function blocks in ladder logic diagramm.
5. 'Check all' after modification of tag assignement to plant areas.
Service Pack V32VIS_1:
Input value '29.02....' for data type Date_&_Time (DT) was not allowed.