Fuse failure of the PI component PEB03
- Insert CPL module / comply with Technical Information 30/70-4135-2
The intermediate logic control (LOG) cannot recognise the error in the PI component. The switching of the LOG must be prevented by means of a CPL module so that the binary ouputs of the PEB03 do not switch to '1' when a fault occurs.In addition, the plug-in jumper allocation contained in the appendix to Technical Information 30/70-4135-2 must be complied with prior to commissioning.
When a fuse failure of the PI component PEB03 occurs, all channels of the affected PI component register the binary output signal '1'.As a result, all motors switch themselves on.