Different configuration in the redundant CMX40 pair
A description of this resolution:
- Restart the redundancy balancing on the active CMX 40 with the relevant CONFIN function or call up the
"Different configuration in the redundant CMX40 pair" resolves the following:
- Service Station
When the function "Parameterize/Simulate" is started, a redundancy balancing of the CMX 40 pair is already active. This is recognized by the SES function and reported to the user. In addition the information is given that the passive CMX 40 is excluded from the function. A parameter update in the passive CMX 40 by means of a redundancy balancing is triggered.
If the function "Parameterize/Simulate" cannot be terminated properly, the requested redundancy balancing will not be carried out.
As a result the redundant CMX 40s have different parameter or simulation versions. This is recognized on the service station when the "Parameterize/Simulate" function starts and another redundancy balancing is automatically requested.
The underlying cause is:
- Disturbed communication between the service station and the CMX 40 or RESET of the service station.