CMX 40 - Using RUPI versions for the A-, L- or SA-bus
A description of this resolution:
- Check the software version of the new module before exchanging modules.
Before exchanging a module, read off the software status currently in use (via CONFIN-module status) and compare it with the software status of the new module. Do not use the module unless use of that software version is permitted.
'CMX 40 - Using RUPI versions for the A-, L- or SA-bus' resolves the following:
All memories on the Contronic E modules are defined in a system package. Before a module is exchanged, check that the memory version of the new module is identical with the version of the memory on the old module and check that this version is correct for the system package used. This is the only way to guarantee that the new module will work correctly.
For the version of the Bus-RUPIs there is, however, an exception which is defined as follows:
For system packages with version 3.01 and higher only use Bus-RUPI 1.03 dated 08.02.1993 or Bus-RUPI Version 1.04 dated 11.11.1994.