Station init after abortion of an action
A description of this resolution:
- Before every station init, start the station dialog again.
If the error occurs as a result of non-observance of the handling instructions, the affected station will have to be loaded into the system list online.
'Station init after abortion of an action' resolves the following:
- Operator Station
When an action in the system dialog (e .g. loading a text list) with an error (error message: FAULT DURING CONFI LOAD/STORE) is aborted, the system display is not updated. If the station is initialized from this status, the system continues to work with incorrect station addresses.
These incorrect station addresses are initialized on the MM and result in incorrect references which in turn lead to coupling errors. In a graphic display this means the loss of all the process loop values (live values) of the station that was initialized as a result of the incorrect address (station number).
The process loop values that are disturbed in the graphic display are labelled with a 'K' (coupling error).
The underlying cause is:
- System display not updated when actions are aborted.