Function interpreter - Function does not run
- Check the unit status of the card with CONFIN
After the peripheral card has been configured and the communication between the SES and the P-card has been reported as disturbed, the unit status of the card should be checked with CONFIN.
If the interpreter is inactive, it can be restarted with the function
’Partial Loading (corresponding to hardware)’.
The functional task does not run; this means that no measured values are transmitted to the CMX module.
During the actions:
- compile / link / load or partial loading or parameterizing / simulating
the function interpreter (it manages configuration data of the P-card) is – after the configuration data of the P-card have been loaded – stopped and then started again immediately.
If a communication disturbance of the type that causes the interpreter to stop, but not to be started again, occurs during this short period, then the card stops sending measured values to the CMX.