Control Builder M, version 3.2/1 - No Clock Synchronization Status from AC 800C
Problem:Solution
- The error is corrected in version 3.2/4.
[ref 3BSE029566D0008 VASMASOITA0845 ]
- Control Builder M, version 3.2/1 - No Clock Synchronization Status from AC 800C
The Control Builder M’s Clock Synchronization Status tool (Tools > Maintenance > Clock Synch > Status…) does not work with AC 800C.
The IP address of any AC800C is not shown in the Clock Synchronization Status window.
- Article imported from the previous version of KnowledgeBank
Asked 13 years ago
Add new comment