S800 I/O - unable to configure / use pulse-train outputs
- Use alternative configuration or I/O type
The work around is to use some direct I/O, S100 I/O for this function, or change the configuration to utilize an external transducer to create the pulse-train.
Refer to the TechInfoBank for additional information: Click Here
- After installing S800 I/O, pulse-train outputs are not able to be configured/used.
- Function not supported
The I/O products that operate over a communication bus (TRIO and S800) do not support pulse-train output due to the communication time needed over the bus. Pulse-duration is supported.