Interrupt conflicts between EISA/PCI The solution was to assign the EISA board to a different interrupt. The PCI RTAB board runs at IRQ11, so the EISA board was reassigned to an unused IRQ (in this case IRQ7). Both boards worked fine after a reboot of the PC.
Interrupt conflicts between EISA/PCI PCI RTAB boards can not share interrupts with EISA cards. When trying to use AdvaBuild Version 3.0 for NT, a PCI RTAB board and an ISA network card were assigned the same interrupt. This prevented both the network card and PCI RTAB board from working.
Article imported from the previous version of KnowledgeBank