2 head 747i on Canandaigua
- Two head conversion works for 748i but not for 747i. Use this procedure for 747i two head conversion.
The procedure in the Canandaigua release notes for the two head conversion works for 748i but not for 747i. Use this procedure for 747i two head conversion.
Q. Pull up an hpterm window and su to root.
R. cd to /dev and do a ll crt*. The devices concerned should be:
crw-rw-rw- 1 bin bin 174 0x000000 Jun 10I996 crt
crw-rw-rw- 1 bin bin 174 0x000000 May 13I4:28 crt0
crw-rw-rw- 1 bin bin 174 0x000004 May 13I4:28 crt1
S. The crt1 will need to be created. From the # prompt and in the /dev directory
type ‘mknod crt1 c 174 0x000004’ enter.
T. Then type ‘chown bin:bin crt1’ enter. Then ‘chmod 666 crt1’ enter.
U. Do a ll crt* and check that the devices and permissions match the above example.
V. To replace the X0screens with the X0screens.2head
type ‘cp -p /etc/X11/X0screens /etc/X11/X0screens.orig’ enter.
Then ‘cp -p /opt/advant/MOD-OS/etc/X0screens.2head /etc/X11/X0screens’ enter.
W. To make this change take effect, reboot the node.
- Need help setting up dual monitors