B180L shipped with HP P910 or Nokia Monitors
- Change monitor settings
The B180L is using an old monitor setting that does not appear to be supported by the newer model monitors.
To change the setting do the following:
If the system is running
- Remotely log into it and shut it down.
- Power off
Find an older style HP Monitor and connect it to the system
Power the system on
When the following message appears press any key to discontinue
Processor is booting from the first available device.
To discontinue press any key
This will get you to the main menu
Path Slot Head HPA Resolution Freq. Type Class GRAPHICS(0) 1 0 f8000000 1280x1024 72 12
> MO LIST
Path Slot Head Type Resolution Freq. Class
GRAPHICS(0) 1 0 1 1280x1024 75 VESA
> MO GRAPHICS(0) 1
Power off the system
Switch monitors and power on.Problems
- 'No Signal' on displays when powered on