X-Terminal launching issue with Windows7 Machine
Below is the procedure to setup Exceed X-Terminal on WIndows7:
Make sure UNIX and XTerminal both are connected on TCP/IP on same domain and same switch.
Make sure PING works between X Terminal and UNIX PC.
Install Open Text Exceed 14 on X Terminal PC on Windows7 Professional OS.
Setup IP address on one of the NIC e.g.172.16.4.149 (255.255.252.0) on X Terminal PC. e.g.IP address of UNIX is 172.16.4.191.
Connect X Terminal and Advant UNIX station on same Physical Switch.
Make sure PING works between the stations.
Setup the X Terminal PC using Exceed 14 with UNIX station 1.8/6.
1> Configure the XConfig and specify the Communication details
a) Communications Tab- Communication IP Discovery - Server Address -IP Address of UNIX
b) Communications Tab- Startup Mode - XDMCP Query and select Configure Button, XDMCP Startup Modes Window appears
c) XDMCP Startup Modes Window - General-Connect Host eneter IP Address of UNIX
2> Screen and Video details
a) Screen0- Server Visual Setting =Color -Pseudo Color Emulation
b) Video Screen - Compute Based On Monitor DPI dots per inch setting- DPI 75-->>100
Then Launch the XDCMP Query to Launch the X session.
a) Enter User as customer enter and no password enter for Advant Master. Enter Operator/operator for Advant MOD setup
b) Select wp3 or wp4 or wp5 workplace and say ok (password is same as wp#)
c) This will start XTerminal window. Please wait for few minutes window appears. Adavnt Basic Screen window appears. Enter the required aosmaxd password and lauch the graphics.