Samson Positioner 373X-5 Rev.1 Valve Staying in 100% even when the SP is 0%
I am facing one issue with Samson Positioner 373X-5 Rev.1 Positioner,
When we power off the Valve by Removing the Power Supply or restart the device from the FF Builder, it is going to the Fail Safe Condition i.e.; 100%.
But after resuming the Power Supply, it stays in 100% even when the Set point from the DCS is 0%.
If we change the Set point i.e.; to 0.1% from the DCS then it comes back to 0.1%