MMS Communication between controllers
Could the AC800M be set up to communicate MMS to other non AC800M's. Eg AC800M taling to BRC400 via MMS communication protocol ?
Asked 3 years ago
Answers
0
For historical reasons, MMS is only used by ABB in the Sattline and AC800M controllers ( which were developed from the earlier Sattline product range ) although MMS is an "open" specification it really is not very widely used.
Answered 3 years ago
0
You could use a BRC410 and a CI867 on the AC800M and use modbus tcp/ip instead.
Add new comment