Ip setting for Redundant 900f controller
I want to know about whether the Ip settings for both Controller Eth1 and Eth 2 should be same or different. Kindly suggest me with example.my settings for Eth 1in primary controller is 172.16.4.1 and Eth 1 for secondary controller is 172.16.4.2 and wat Wil be the ip for Eth 2 for both the controller which i like to make redundancy link between controller.
To enable redundancy no need to configure any IP, just you need to enable redundancy on Eth2. That you can set via Keypad. If I am not wrong follow this way, press F1 > IP setting, Select eth2 then press up arrow button redundancy will get enabled. check information from manual...