Asset viewer Aspect does not show the status (in color)of the instrument connected.
800xA 5.1 RevD FP4 used,
Asset viewer Aspect does not show the status of the instrument connected.
* The Asset monitor aspect shows the status "good"
* Control connection shows goood.
but, the actual instrument status color in not getting indicated.
It will be really good if you ellobrate your issue , in terms of what indication is coming for Asset monitor is the condition is good and if the condition is alarm state .
However following things you can verify in your system :
1. Verify that Asset tree service is running in Service structure.
2. Verify that Under Aspect System Structure >>Asset Tree , Aspect system >> Asset Viewer , Aspect type >> Asset Viewer , Aspect category -- Icon setting general property aspect check value for UseNamur property is True . if it is False change is to true and verify that Asset Viewer is showing proper indication or not .
If after above two steps your issue is not resolved , probably require more data as mentioned for giving resolution for the problem.