special repeater for single mode to be used with TB825
I'm former ABB and right now I've a problem for using TB825 for communicate on both side.
Due to customer already lay over 800m Single mode fiber optics, so the solutions is using converter to convert MM of TB825 to SM and convert back again on the destination.
I found in technical discussion that it need to use special repeater.
Please kindly suggest the model of equipment can be applied to the requirement to save a waste money to laying the new multimode fiber optics.
Usually we use TB825 for modulebus connectivity within a distance of 1000mtrs and TB826 for a distance within 5000mtrs. I am not sure that if there is some special repeater to convert SM to MM. But replacing TB825 with TB826 should work.
Still i suggest you to go through the discussion in the below link also.
you will need a SPLICING BOX,which will act as intermediate box for your Remote Panel.
In my case, I got it done with my Local ABB team. We had discussions about requirement, and get a box for Input and Output wire entries.
ABB Bangalore(India) is quite supporting for every task.
It will not cost you much.