Frozen display ABB pm573 issue

I have a pm573, it worked well a lot of time but yesterday i powered it on and the display was frozen on startup, showing "AC500" all time, the display dont changue and the run led and the err led are turned off despite the run led should be red or green but not off. The power led is on

also the display dont show backround light.

My power supply is ok, tested with polimeter. I havent caused any short circuit.

Please i would like you to help fixing this if is possible

Sorry for my medium level english.

Thanks

Comments (0) New comment

terar Rank: 4012

Asked 5 years ago

Answer this question Follow

Answers

firts one...do you have backup of your program? This is very essential, of course.

Have you tried to connect with Control Builder to examine the error log?

Can you go online with Control Builder?

If you have the backup copy of program and you have access to the cpu with Control Builder, you can try to reset the cpu and download again the program.

Hope this help you

Let us now about the results

Comments (5) New comment

Flavio Mussolin AKS expert

Rank: 3

Answered 5 years ago

In addition of this ......If you are not able to login with existing program then you can try to download with one blank program (make seperate program) and once program is downloaded then make boot project and wait for 5 sec....after that restart the PLC and download your program...

Comments (3) New comment

Pratik Agrawal Rank: 107

Answered 5 years ago

Question details

Frozen display ABB pm573 issue

Answers

Other questions needing answers

Related topics

AKS experts