AO PNSM Asset Alarms
I am using the PNSM "Generic_Computer_node_v1_8" object and it is working except for my alarms. I have set CPU load to 2% and the indicator on the faceplate turns red but I do not get any alarms. According to the asset documentation.
"Asset Monitor detects the fault in the device and triggers alarm. Following asset
monitors are provided with the object type:
• Device Connection: Monitors the connection between the node and the device.
It triggers the alarm when device is disconnected from the network.
• CPU Load: Monitors the computer CPU Load. It triggers the alarm when CPU
Load crosses the warning or error limit."
I have added the AO alarms to the default alarm and event list configuration library template. I have also created my own local Alarm list aspect and alarm and event list configuration aspect.
Anyone have any thoughts as to what I am missing.
Create a Alarm List and Go to Config view and select IT Asset Alarms Configuration : Alarm and Event List Configuration for Library Structure drop down.
Increase CPU Load and verify that CPU Load Alarm is coming in newly created Alarm List.
Reply if still the same issue is there.