Batch Procedure "Schedule Job" Block Fails
We have an Excell Report that needs to execute at the end of a Batch. The report is configured and executes correctly when triggered either Manually or by an expression in the scheduling structure.
However, If the report is scheduled by a "Schedule Job" batch manager action in a procedure, then the report does not run and the Batch Procedure fails.
System is 800xA SV5.1 FP4 with a non-redundant batch manager and non-redundant IM. The scheduler service runs on the IM.
Any ideas ?
Voted best answer
Hi Rob, this error sounds like the "Job scheduling error" in the PFC. If that's the case, please make sure that the "Use 800xA Historian" checkbox is enabled (as per 3BUA000146-510 F) in the following aspect:
Library Structure > Batch Management > Configuration > Miscellaneous Config Aspect
I hope this helps
Source: 3BUA000146-510 F