would you please introduce a reference to know error code in error-fifo ?for AC800f
Voted best answer
The error fifo is full of Error 0x10001002 which means E_COM_RESOURCE and indicates that the communication was trying to send a request but could not find any response buffer to contain the answer. All response buffers are gone.
It happens in the location sequence COMRECV, COMIF, hseutl, which indicates it could be one or several FF-HSE networks.
Also the control network seem to be quite full with 188K transmits per second from that station, which is roughly 20% of network bandwith.
639605 collissions and 811700 unknown receive packages also point to heavy loaded network with a lot of non Freelance communication on the network.
Propose to reduce the network load and remove the non Freelance communication from the control network.
2 other errors happend (Error 0xFFFF03A7 and 0xFFFF0385) regarding the redundancy where it appears the redundancy link connection was lost.
Error 0x80000310 is not an error actually but indicates the system time was set.
In general we refrain from publishing the error codes, because it is not as simple as looking up that code. One always has to consider the other information in the diagnostic files also, which can only be done by our experts.
I strongly recommend to open a support case if you find a non standard behaviour of your installation with a lot of entries in the error fifo.