Connectivity server not accepting domain.
800xA System having redundant i.e AS-1, AS-2, CS-1, CS-2 and 5-OS.
When CS-1 get corrupted then remove it from network. And prepared a new Aspect server domain pc using IIT package setup as pc name AS-1(same as Aspect server existing in network). Then created Connectivity server CS-1 using same IIT package setup giving the path of new domain AS-1 that was I earlier made. All operation was successfully done and CS-1 service connection status was heathy.
Prepared CS-1 is insert in existing running network. but it don't accpeting domain AS-1. CS-1 is opening(username- 800xAInstallAccount) without selecting domain but service connection status is not getting healthy.
Note:- Node is note remove from AS-1 and DNS forward lookup zone and reverse lookup zone. RNRP showing all network ip. CS-1 pinging from AS-1 side.
So, Suggestion is required to solve this problem.
Your Question is not clear, can you write what you are going to do.
First of all removing CS1 and adding to new domain in the other temp.system offcourse it will allow you to add.
Where in adding the same server again to the existing domain server it won't allow until you won't remove the node traces from the domain server then add again since the server name already exist in the domain hence it won't allow you to add the same name again.