ClockSynch System Error....
I´m facing problem with time synch. I have made some changes to the existing time synch configuration and after a few changes and downloads i get this message in the controller log:
ClockSynch System Error: MsgQSend failed, Quene full Error Code=10, errno=0x3d0002 LP=305
The CPU we are running is the latest PM891. I read in another tread that one solution is to reset the CPU, also take out batteries and then download again. That will result in "cold download". The plant is in operation and it is not possible to reset the whole CPU.
No other solutions found? Is this a bug in the system that has to be fixed in firmware?
Thank you in advance.
Best Regards // Mattias
Buffer memory of controller may be full hence its showing memory full hence it needs controller reset..may be u r using SNTP protocol to sync controllers so one thing u can do after reset is set time update interval from 20 to 60 so that u can avoid more time sync messages in controller log
You are more than welcome to use AKS to ask questions, get hints and retrieve experience from other users of ABB automation ware, but please don't stop reporting problems and possible bugs to your regional ABB support center for proper handling, eg escalation to center of excellence.