ACS880 / DCS880 More than 3 IO Extension Modules
Is there a way to add more than 3 IO Extension Modules to a ACS880 or DCS880 drive?
I need to add 3x FDIO-01 and 1x FAIO-01 using 2x FEA-03 and 1x FDCO-01. But FW only shows 3 groups for IO modules, Groups 14 I/O extension module 1, 15 I/O extension module 2, 16 I/O extension module 3.
How can I address and set parameters for the fourth IO module? Is it possible using Drive Application Builder?
For existing drives, do I need a new memory with option +N8010 or can the existing memory be updated with license?
Is there any other way to do this without Drive AP?
Look for 3AUA0000115811 = FEA-03 F-series extension adapter
From the manual:
"The FEA-03 is an extension adapter that is used to install I/O extension modules and FEN encoder interface modules outside the drive unit.
The FEA-03 extension adapter increases the number of F-series option modules that can be connected to the control unit of the drive.
One or two option modules can be installed on one extension adapter"