ACS 850 start stop
I have AcS 850 drive for pinch roll application in Rolling mill I want to run this through START /STOP PB at fixed 800rpm with out using pot.
Please guide me.
Answer this question Follow
You can assign the fixed speed with parameter 26.02 - for example DI1, i.e. the same one you will use for the start - group 10 parameter 10.01 and 10.02
Once this is done, attribute the constant speed to parameter 26.06 - in your case 800 rpm
I have assumed that you have knowledge of all the other parameters necessary for the operation of your machine.
Other questions needing answers
Application Knowledge Store (AKS) will no longer be available after the 31 July 2021.
We are enhancing our Customer and Partner experience and will be migrating data from AKS to the new portal.
During the transition please direct your questions to:
If you are an ABB customer with a CARE Agreement you can access our Customer Portal, where you can find solutions and ask questions, and communicate directly with ABB.
If you are not an existing CARE customer with ABB please contact your local ABB sales office.
For our authorised Partners you can directly access additional support information in the Partner Portal