connecting horn to ACS880-07-1160-7 Drive
Hi, We are working on driving a belt conveyor in mining industrial using four ACS880-07-1160-7 VFDs and we require one horn to be connected to them. Horn will be activated for 5 seconds before belt conveyor start up. Which digital output of the VFD can be used and what is the programming in VFD for this sequence? Your help is very appreciated in advance.
Answer this question Follow
Voted best answer
It should be possible with the combination of ROn OFF delay, DIx ON delay and use of 20.19 = Enable Start Command. You also may use 'other bit' functionality. Using of application programming also should do that, still I don't have experience with such for ACS880.
Other questions needing answers
Application Knowledge Store (AKS) will no longer be available after the 31 July 2021.
We are enhancing our Customer and Partner experience and will be migrating data from AKS to the new portal.
During the transition please direct your questions to:
If you are an ABB customer with a CARE Agreement you can access our Customer Portal, where you can find solutions and ask questions, and communicate directly with ABB.
If you are not an existing CARE customer with ABB please contact your local ABB sales office.
For our authorised Partners you can directly access additional support information in the Partner Portal