FPBA-01 configuration for comm fault
Drive controlled via Profibus (CI854 - FPBA-01) by AC800M.
In case of communication fault between master and slave, drive must keep running.
Is this configuration done in drive settings or do I need to change also FPBA-01 adapter HW settings in controller; e.g.“Control-zero mode” parameter or some other parameter?
On the side of the AC800 controller I can't tell you, but on the drive side it is enough that in parameter 50.02 - operating mode in communication loss - you set one of the following options: ref. safe speed or last reference. The drive will warn you, but will continue to run
Hope this help you