Automation Builder 2.4. - Compatibility profiles are missing: Control Builder Plus 2.3.0
Hi, I tried to open older AC500 Project file which was clearly programmed with CBP 2.3.0 using AB 2.4.
When I open the project the following message appears (see attachment).
My question is: Is it possible to install these compatibility profiles in my AB 2.4. or I need CBP 2.3.0 install and where can i find it?
Asked 4 months ago
Voted best answer
2
Hi
from what it looks like - photo you have attached - it should be an application with Safety components, which was included in the old Control Builder, but it is not in the new Automation Builder, as you need to have a specific license. I suggest you contact your ABB distributor and get advice on this, but you will almost certainly need to purchase the license to use the Safety components.
BR
Flavio
from what it looks like - photo you have attached - it should be an application with Safety components, which was included in the old Control Builder, but it is not in the new Automation Builder, as you need to have a specific license. I suggest you contact your ABB distributor and get advice on this, but you will almost certainly need to purchase the license to use the Safety components.
BR
Flavio
Add new comment