Problems reading from IED with v6.1 IEC 61850

Hi

I have somw problem swith readingthe data from a relay with version V6.1?
Some data in a RCB are ok, and some are not.

Comments (1) New comment

anny Rank: 951

Asked 1 month ago

Answer this question Follow

Answers

Hi

I have imported a SCD file from Schneider Easrgy P3F30 relay. I have used IED Scout and the data seems ok, but the data is inconsistant when transfer over to 800xa. See screenshot for IEC61850 utility.

There is some information on timestamp, where I have value N=1 and N=0 on some DOsignals.

I am not sure where the fault is.

Comments (3) New comment

by ParthibanT Rank: 42 on 3/1/2021 8:17:14 AM | Like (0) | Report

I can see DI LN is in communication with Good Quality.
Analog Hz is with Unknown or Bad.
Make sure the SCD/CID imported in 800xA system, the same is imported in IED as well.
Check for IED level Online Diagnostics.
Also ensure all required DI/AI signals are in dataset and respective control blocks are configured.

by anny Rank: 951 on 3/1/2021 8:20:50 AM | Like (0) | Report

This was the error during import:
Error 2021-03-01 14:17:50.516 Configuration: Could not get logical node data (item tags) for station IED0002 Relay VampLPHD1: Invalid pointer
Error 2021-03-01 14:17:50.620 Configuration: Could not get logical node data (item tags) for station IED0002 Relay DI08GGIO52: Invalid pointer
Error 2021-03-01 14:17:50.620 Configuration: Could not get logical node data (item tags) for station IED0002 Relay DI09GGIO53: Invalid pointer
Error 2021-03-01 14:17:50.621 Configuration: Could not get logical node data (item tags) for station IED0002 Relay DI10GGIO54: Invalid pointer
Error 2021-03-01 14:17:50.622 Configuration: Could not get logical node data (item tags) for station IED0002 Relay DI11GGIO55: Invalid pointer
Error 2021-03-01 14:17:50.623 Configuration: Could not get logical node data (item tags) for station IED0002 Relay DI12GGIO56: Invalid pointer
Error 2021-03-01 14:17:50.624 Configuration: Could not get logical node data (item tags) for station IED0002 Relay DI14GGIO58: Invalid pointer

by anny Rank: 951 on 3/1/2021 8:22:17 AM | Like (0) | Report

When i clock on the faceplate for the breaker, i get red error cross all over the faceplate and they disappear after a second.

Add new comment

anny Rank: 951

Answered 1 month ago

IEc61850 ss.docx

Question details

Problems reading from IED with v6.1 IEC 61850

Answers

Other questions needing answers

Related topics

AKS experts