Getting started with AC500 Build (Automation Builder Setup)
I am a student and working for the first time in the ABB environment for my bachelor thesis.
I got a motor test bench and need to integrate a PID controller, one for speed (left motor) and one for torque (right motor), as can be seen in the circuit diagram (https://fhjoanneum-my.sharepoint.com/...).
All modules except the DR-2477 and the circuit breakers are from ABB, this is a torque sensor.
- Do you have any recommendations on how to get started with Automation Builder (2.4, Basic, I could also use the 30-day trial though)?
- I have a hard time finding good tutorials, especially about creating a project and setting it up for my build. The videos from ABB are either very old or about a PLC which is connected per ETH, mine has a SD-Card slot.
- I really struggle with adding all the modules in the right way to the project.
Thank you very much for your help in advance.
This question has not yet been answered.