Copying the Program from one PM573 to a new PM573.
Hi there,
I am new to PLC commissioning, so need some help.
We have some PLCs installed at a project, but some of this have become defective, I have purchased new for the replacement, I want to know, how I can copy the configuration from a working PM573 to a new one.
I have managed to do the network configuration and am able to ping the devices from my Laptop in the same subnet.
I have also installed Automation builder 2.4 Basic version and when I scan, I am able to see all my PLCs, but as I click on any PLC, the Automation Builder gives a communication error, "Cannot communicate with the PLC".
Also tried to insert an 8 GB SD Card but no change.
Please advise solution.
I am new to PLC commissioning, so need some help.
We have some PLCs installed at a project, but some of this have become defective, I have purchased new for the replacement, I want to know, how I can copy the configuration from a working PM573 to a new one.
I have managed to do the network configuration and am able to ping the devices from my Laptop in the same subnet.
I have also installed Automation builder 2.4 Basic version and when I scan, I am able to see all my PLCs, but as I click on any PLC, the Automation Builder gives a communication error, "Cannot communicate with the PLC".
Also tried to insert an 8 GB SD Card but no change.
Please advise solution.
Answers
Hi
you can try my app regarding your question at the following link:
https://forum-controlsystems.abb.com/...
https://forum-controlsystems.abb.com/...
make sure you have the source programs.
Hope this help you
BR
Flavio
you can try my app regarding your question at the following link:
https://forum-controlsystems.abb.com/...
https://forum-controlsystems.abb.com/...
make sure you have the source programs.
Hope this help you
BR
Flavio
by hammadashiq Rank: 2518 on 1/31/2021 12:28:01 AM | Like (0) | Report
Can I use any Memory card in PM573 or there is any specific.
What is the maximum capacity of memory card, compatible with PM573 and what format it should be?
Can you please advise about the "communication Error" as I don't have the TK503 cable.
Add new comment