PEP12 Power supply replacement
Dear all,
Please help me regarding Power Supply replacement, i have Bailey Infi90 System, Just replaced with ABB 800xA System. So now i have PEP12 Power supply at Server Panel, bow now a days PEP12 is just obseleted, PEP13 new version is available. My question is that is that possible if my any one equipment failed like Entry Panel and i replaced that one with PEP13 version and all other Power supply equipment with PEP12. Is that works?
Please help me regarding Power Supply replacement, i have Bailey Infi90 System, Just replaced with ABB 800xA System. So now i have PEP12 Power supply at Server Panel, bow now a days PEP12 is just obseleted, PEP13 new version is available. My question is that is that possible if my any one equipment failed like Entry Panel and i replaced that one with PEP13 version and all other Power supply equipment with PEP12. Is that works?
Asked 4 months ago
Answers
0
Hi,
The P-HA-RPS-PEP11012 is a single PEP chassis for 120V/240V supplies with CAT II over voltage protection. The P-HA-RPS-PEP11013 is also a single PEP chassis for 120/240V supplies but with CAT III over voltage protection, having transient suppressors fitted to the rear of the P-HA-RPS-PEP11013 for the CAT III over voltage protection. So yes, the P-HA-RPS-PEP11013 can replace a P-HA-RPS-PEP11012.
BR,
Alan
The P-HA-RPS-PEP11012 is a single PEP chassis for 120V/240V supplies with CAT II over voltage protection. The P-HA-RPS-PEP11013 is also a single PEP chassis for 120/240V supplies but with CAT III over voltage protection, having transient suppressors fitted to the rear of the P-HA-RPS-PEP11013 for the CAT III over voltage protection. So yes, the P-HA-RPS-PEP11013 can replace a P-HA-RPS-PEP11012.
BR,
Alan
Answered 4 months ago
0
Normal PEP12 consist of these components
PHARPSCH100000
PHARPSFAN03000
PHARPSPEP11012
PHARPS11000000
Can i Replace only PHARPSPEP11012 component with PHARPSPEP11013 version n other r old version.. Is that Supported each one.
PHARPSCH100000
PHARPSFAN03000
PHARPSPEP11012
PHARPS11000000
Can i Replace only PHARPSPEP11012 component with PHARPSPEP11013 version n other r old version.. Is that Supported each one.
Answered 4 months ago
0
Hi,
For clarity this power system is often referred to as an MPSIII or Modular Power System III and the PEP is a small part of the MPS. As you have found out most of the MPSIII components are now classed as limited or best effort support but some of the most common parts are still available. You should check with your local ABB office for current availability of all items. As of a few months ago the following was mostly accurate.
PHARPSCH100000 -> Power tray chassis -> Still available.
PHARPSFAN03000 -> 1RU Fan tray -> Still available.
PHARPSPEP11012 -> Power entry Panel -> You can use the PHARPSPEP11013 as a replacement if required.
PHARPS11000000 -> Power supply tray -> You can replace both PHARPS11000000 with PHARPS32000000 if required ***Both Power Supply trays MUST BE THE SAME PART NUMBER - DO NOT MIX***
Another option might be upgrading to the MPSIV power system.
BR,
Alan
For clarity this power system is often referred to as an MPSIII or Modular Power System III and the PEP is a small part of the MPS. As you have found out most of the MPSIII components are now classed as limited or best effort support but some of the most common parts are still available. You should check with your local ABB office for current availability of all items. As of a few months ago the following was mostly accurate.
PHARPSCH100000 -> Power tray chassis -> Still available.
PHARPSFAN03000 -> 1RU Fan tray -> Still available.
PHARPSPEP11012 -> Power entry Panel -> You can use the PHARPSPEP11013 as a replacement if required.
PHARPS11000000 -> Power supply tray -> You can replace both PHARPS11000000 with PHARPS32000000 if required ***Both Power Supply trays MUST BE THE SAME PART NUMBER - DO NOT MIX***
Another option might be upgrading to the MPSIV power system.
BR,
Alan
Answered 4 months ago
0
Thanks alan 👍
Answered 4 months ago
by Alan Rank: 13 on 1/27/2021 7:30:34 PM | Like (0) | Report
Hi,
Are you referring to the Infi90 power entry panels IEPEP02 / IEPEP03 or is the PEP12 / PEP13 something different. If you have a picture may be post that.
BR,
Alan
by jabbi_king Rank: 505 on 1/27/2021 8:09:24 PM | Like (0) | Report
I am referring PEP11012/PEP11013
Add new comment