ALarms fof DI830 SOE module
Hi,
I would like to know the process of generating alarms in 800xA for SOE cards with external timestamps. I believe if I use alarm basic condition then the timestamp generated will be of this block and not the DI830. I want time stamping of DI830 in events.
I have gone through the configuration manual but did not found anything relevant which can help.
I would like to know the process of generating alarms in 800xA for SOE cards with external timestamps. I believe if I use alarm basic condition then the timestamp generated will be of this block and not the DI830. I want time stamping of DI830 in events.
I have gone through the configuration manual but did not found anything relevant which can help.
Asked 3 months ago
Answers
0
Please enable the SOE in Card level, use the signal ID in the software module , Enable external time stamp.
Doing software forcing will not generate time stamp events , if you want to test make sure you have the hardware setup and simulate on hardware.
Doing software forcing will not generate time stamp events , if you want to test make sure you have the hardware setup and simulate on hardware.
Answered 3 months ago
0
Didn't you ask the same three weeks ago?
I provided some working samples and references to Online Help in Control Builder M Professional:
https://forum-controlsystems.abb.com/...
I provided some working samples and references to Online Help in Control Builder M Professional:
https://forum-controlsystems.abb.com/...
Add new comment