ACS850-04 demo suitcase replace with ACS880-01
Hello everybody.
I have not much experience with ABB ACS850-04 and ACS880-01. I have problem to operate ACS880-01 drive on ACS850-04 demo suitcase.
I replaced ACS850-04 inverter drive replaced by ACS880-01 drive and connect 3GVA052002-ASA motor.
The parameter setting was done and external command (DI) was set. But it did not work and no fault or error.
I also tried drive composer software to run the motor. It did not work too even communication was succesful.
I have attached some pictures about the drive in this post.
Are there anyone who help with this issue.
Thank you so much for your support.
Baagii 
Asked 3 months ago
Answers
0
Hi,
Look the symbol on control panel:
![]()
![]()
The source of the inhibiting signal that is preventing the drive from starting you can find in 06.18
For details, read the corresponding manuals (3AUA0000085967, 3AUA0000085685) Source: 3AUA0000085967, 3AUA0000085685
Look the symbol on control panel:
The source of the inhibiting signal that is preventing the drive from starting you can find in 06.18
For details, read the corresponding manuals (3AUA0000085967, 3AUA0000085685) Source: 3AUA0000085967, 3AUA0000085685
0
Source: 3AUA0000085967, 3AUA0000085685
by kstoilov
https://forum-controlsystems.abb.com/20242735/ACS880-1-has-some-problem
Add new comment