Hi All, I have a question related to the communication of SOE modules. I have DI830 in 3 locations (with TB840 & TB825-MM communication). starting from controller, cluster address for TB840 is 1,2,3 (in control builder 101, 201,301). I require support regarding the POF cable connections. theconfiguration is shown in the screenshot. TB840 has 2 inputs for POF cable termination 1. At location 3, POF from TB825 (Tx1-RX1) will go to T840. At TB840 side, at which port it should be terminated (port closer to baseplate or to the one away from baseplate) 2. At location 2, inputs from location 3 will be merged through TB825 SC-ST patch cord. Location 2 is supposed to act as a router between location 1 and location 3. So again at what ports iof TB840 of location 2,nputs coming from location 3 will be connected ? 3. At which port of TB840 at location 2, output to be sent to location 1 to be connected. 4. At location 1 presently, POF connected to the port away from baseplate is connected to the controller and the one closure to the baseplate is connected to TB825.
In the present terminations, DI830 shows an unhealthy status. Also I would like to know how to generate external timestamping for events ( can we use basicalarm cond block to generate alarm and events or some other block is available )
Kindly let me know how to correct this connection