Time synchronizing to ac800f
GPS but it is not applied in the controllers settings. Please help me with this. Thank
May we know which steps followed, in detail ?
AC800F or any controller from Freelance family connects with GPS via it's diagnostic port via TK890F(10m)/TK891F(5m) cable.
The default baud rate is 19200 ( I assume you are using AC800F with latest F2019 SP1/SP2 version),
The recommended radio clock is
and your controller should be with standard IP setting 172.16.1.x/255.255.240.0, On all operator station keep time synch enable via 'freelance settings' window. to get it synchronise from controller.
From your installation setup, under manual folder find these two manuals to get information,
2PAA109295-111_A_en_Freelance_Mounting_and_Installation_AC_900F_Controller.pdf , search with keyword 'radio'
3BDD012501-111_A_en_Freelance_Mounting_and_Installation_AC_800F_Controller.pdf , search with keyword 'diagnostic'
And better get connect with your local/regional technical support contact to get you support.