SPO 3.2 Network Diagnostics Tags
Dear Team i have SPO 3.2 Installed on
1. Redundant Pair of Server
2. Operation Station two NUmber
3. Engineering Server One Number
4. GPS Clock One Number
I wanted to know the status(Available\Unavailable) of all these device on SPO 3.2.
Please guide and advise the relevant Chapter of the Manual.
1. Redundant Pair of Server
2. Operation Station two NUmber
3. Engineering Server One Number
4. GPS Clock One Number
I wanted to know the status(Available\Unavailable) of all these device on SPO 3.2.
Please guide and advise the relevant Chapter of the Manual.
Answers
Hi,
You can use the SNMP for monitoring these nodes\devices, etc..
You need a license for this functionality.
If you only want the individual node, then the default diagnostic tags gets created in Operations engineering while creation of new project. Just deploy these tags and it will give you the S+ Operations server related information..
Refer to scanner reference guide for more details.
Regards,
Farooq
You can use the SNMP for monitoring these nodes\devices, etc..
You need a license for this functionality.
If you only want the individual node, then the default diagnostic tags gets created in Operations engineering while creation of new project. Just deploy these tags and it will give you the S+ Operations server related information..
Refer to scanner reference guide for more details.
Regards,
Farooq
Add new comment