ABB CI 502 PNIO Communication with ABB AC 800 PLC
I have an AC800 PLC with CI871 as profinet master. Will it communicate with CI 502 PNIO over profinet?
Is it possible to communicate ABB CI 502 PNIO with AC 800 series PLC..?
Answer this question Follow
Voted best answer
First you need a GSDML file for ABB CI502 PNIO, then you can use with CI871 and CI502 PN IO.
Read more in the user manual “AC 800M, PROFINET IO, Configuration”.
Hope it helps you.
In 800xA 6.1 the hardware lib for the s500 profinet slaves is included.
Other questions needing answers
AC 800M >
CI87x modules >
Application Knowledge Store (AKS) will no longer be available after the 31 July 2021.
We are enhancing our Customer and Partner experience and will be migrating data from AKS to the new portal.
During the transition please direct your questions to:
If you are an ABB customer with a CARE Agreement you can access our Customer Portal, where you can find solutions and ask questions, and communicate directly with ABB.
If you are not an existing CARE customer with ABB please contact your local ABB sales office.
For our authorised Partners you can directly access additional support information in the Partner Portal